<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP Rittal CMC III Hardware Status Sensor

The SNMP Rittal CMC III Hardware Status sensor monitors the overall status of Rittal data center hardware, for example Rittal Computer Multi Control version 3 (CMC III) processing units, Rittal power distribution units (PDU), or Rittal IoT Interfaces and the hardware status of every attached external sensor via the Simple Network Management Protocol (SNMP).

SNMP Rittal CMC III Hardware Status Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP Rittal CMC III hardwarestatus
French: Rittal CMC III statut matériel (SNMP)
German: SNMP Rittal CMC III Hardware Status
Japanese: SNMP Rittal CMC III ハードウェアステータス
Portuguese: Status hardware Rittal CMC III (SNMP)
Russian: Состояние оборудования Rittal CMC III, SNMP
Simplified Chinese: SNMP Rittal CMC III 硬件状态
Spanish: Estado hardware Rittal CMC III (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

cmc3
snmprittal

For more information about basic sensor settings, see section Sensor Settings.

Sensor Display

Setting	Setting
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Overall Device Status	The overall device status Up status: OK, Update Warning status: Changed, Detected, Warning Down status: Alarm, Lost
[Status of attached external sensor]	An attached external sensor status Up status: Firmware Update Pending, Firmware Update Running, OK Warning status: Confirmation Required, Device Changed, Device Detected Down status: Confirmation Required, Device Not Available, Device Lost (Disconnected), Error

Channel

Description

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Overall Device Status

The overall device status

Up status: OK, Update
Warning status: Changed, Detected, Warning
Down status: Alarm, Lost

[Status of attached external sensor]

An attached external sensor status

Up status: Firmware Update Pending, Firmware Update Running, OK
Warning status: Confirmation Required, Device Changed, Device Detected
Down status: Confirmation Required, Device Not Available, Device Lost (Disconnected), Error

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108